Product description
Cutter G3000 (guillotine) is designed to split paper rolls into two parts. The paper roll is fed by a conveyor up to a position below the splitting metal knife. The knife is lowered hydraulically and splits the roller.
The knife then goes up to the rest position and the split roller is then fed forward through the conveyor.
De två hydraulcylindrarna som skickar kniven upp och ned samt hydraulmotorn som sköter transportören drivs via ett hydraulsystem under maskinen. Hela maskinen manövreras via en manöverpanel som sitter på sidan.
A security system with protection gates stops the power to the cutter if someone opens a gate
The cutter consists of a knife holder that slides up and down in a frame with the help of hydraulic cylinders. In the knife holder is a knife steel mounted with seven bolts. The steel is 2100 mm long and 130 mm high. When the knife holder reaches its top position, a knife guard automatically folds over the knife blade.
The conveyor belt is integrated into the machine’s frame and is used to move rolls to a position under the knife and to then drive away the split roll. It consists of a rubber mat driven by a hydraulic motor. The conveyor belt is regulated with buttons on the control panel.
As an option, there is a work table that is placed at the input where the paper rolls are placed.
1. | Control panel | 4. | Hydraulic |
2. | Cutter | 5. | Conveyor |
3. | Protection gates | 6. | Table |
Technical data
Weight | ca.4500 kg | Oil tank | |
Dimensions | - volyme | 150 liter | |
- length | 2100 mm | - hydraulic oil | Hydro H46 |
- width | 3071 mm | Hydraulic cylinders | |
- height | 3104 mm | - type | Cylinder 160 |
- knife lenght | 2100 mm | - cylinder | 100/50 mm |
Electric engine | - stroke | 1250 mm | |
- power | 7,5 kW | Table | |
- speed | 1455 r/min | - width/length | 2500/2500 mm |
- voltage | 400 V (50 Hz) | - height | 1090 mm |
- current | 14,3 A | - max height | 1210 mm |
Hydraulic pump | Conveyor | ||
- volyme | 33 cc | - hydraulic engine | MH 250 |
- capacity | 50 l/min | - width rubber mat | 1200 mm |
- system pressure | 200 bar | - length rubber mat | 5000 mm |